Breville Steam Wand Cleaner Instructions: Step-by-Step Guide

Are you tired of struggling to keep your Breville steam wand clean and free from residue? Look no further because I have the ultimate guide for you! 

In this step-by-step tutorial, I will walk you through the best practices and expert tips on how to effectively clean your Breville steam wand. 

Say goodbye to clogged and grimy steam wands as I unveil the secrets behind perfect cleaning techniques that will leave your espresso machine gleaming and ready for brewing. 

So grab a cup of joe, sit back, and let me show you how to master the art of keeping your Breville steam wand in tip-top shape. 

Let’s dive right in!

Introduction to Breville Steam Wand Cleaner

breville steam wand cleaner instructions

If you’re looking for an easy-to-use and effective steam wand cleaner, look no further than the Breville Steam Wand Cleaner

This powerful little appliance comes with everything you need to clean your steam wand, including a detachable cleaning head, brush attachment, and built-in water tank. 

Plus, the Breville Steam Wand Cleaner is compact and lightweight, so it’s easy to store and transport.

To use the Breville Steam Wand Cleaner, simply fill the built-in water tank with distilled water, attach the cleaning head to the steam wand, and turn on the power switch. 

The machine will do the rest, delivering a steady stream of pressurized steam that will quickly remove any built-up milk residue from your steam wand. 

When finished, detach the cleaning head and brush attachment and rinse them under running water. Then, empty out any remaining water from the tank and store the machine until next time.

What do You need for a Cleaning Session?

If you’re like most people, you probably don’t spend a lot of time thinking about cleaning your Breville steam wand. But if you want to keep it in top condition, it’s important to clean it regularly. 

Here’s what you need for a cleaning session:

  • A soft, clean cloth
  • A toothbrush or other small brush
  • White vinegar
  • distilled water

Start by unplugging the wand and allowing it to cool completely. Then, using the soft cloth, wipe away any built-up residue on the outside of the wand. 

Next, use a toothbrush or small brush to clean the steam tip. Be sure to get into all the nooks and crannies.

Once the steam tip is clean, mix equal parts white vinegar and distilled water in a bowl. Dip a corner of the cloth into the mixture and use it to wipe down the inside of the wand. Rinse well with distilled water and dry with a clean cloth.

Reassemble the wand and plug it back in. You’re now ready to enjoy freshly steamed milk in your coffee or tea!

Step-by-Step Instructions for Cleaning the Breville Steam Wand Cleaner

Assuming you have already purchased the Breville Steam Wand Cleaner, it is now time to get cleaning! Here are step-by-step instructions on how to use this product: 

  1. Boil a pot of water on the stovetop.
  2. Fill the tank of the Breville Steam Wand Cleaner with boiling water.
  3. Insert the cleaning brush into the opening at the top of the wand.
  4. Hold the wand over a sink and press the button on the handle to release the steam. Be sure to keep your hand close to the opening in case any hot water or steam escapes. Allow all of the water to come out of the wand before moving on to step 5.
  5. Remove the brush from the wand and rinse it off under running water. 
  6. Repeat steps 3-5 until no more dirt or debris comes out of the wand when you release the steam (this may take a few attempts).
  7. Fill up a bowl or sink with hot, soapy water and insert just the brush head of the Breville Steam Wand Cleaner into it. 
  8. Swish it around for a minute or two, then rinse clean and dry with a towel.
  9. To disinfect and descale your wand, fill up another bowl or sink with equal parts white vinegar and water (you can also use lemon juice if you prefer). 
  10. Submerge just the metal tip of your Breville Steam Wand Cleaner

How to Disassemble and Reassemble the Breville Steam Wand Cleaner?

Assuming that you have all the necessary tools to complete the task at hand, let’s get started. 

First, we need to remove the knob by unscrewing it from the steam wand. Next, use a flathead screwdriver to remove the two screws that are holding the plastic housing in place. With the housing removed, we can now access the steam wand itself.

To begin disassembling the steam wand, start by unscrewing the black cap at the top. Underneath this cap is a small metal piece that helps to keep the pressure in check – be careful not to lose this! 

With the cap off, you should now be able to see a small rubber gasket. Using your fingers or a pair of pliers, carefully pull this gasket off and set it aside.

With the gasket removed, you should now be able to see a white O-ring. This O-ring helps to create a seal between the different parts of the steam wand, so make sure not to damage it when removing it. 

With both the gasket and O-ring removed, you can now unscrew the brass nut that is holding everything together. Once this nut is loose, you can pull out the entire inner assembly of the steam wand.

The final step in disassembling the Breville steam wand is to remove the silicone sleeve that surrounds it. To do this, simply peel back one side of the sleeve and then work it off of the wand

Here is an example of a Steam wand cleaner as well! Click HERE to check it out!


Cleaning and maintaining your Breville Steam Wand is an important part of any barista’s workflow. 

Following the step-by-step instructions I have provided you with will make it easy for you to keep your machine clean and running smoothly and ensure that your coffee drinks always come out tasting great. 

With proper cleaning and maintenance, you can expect many years of use from your Breville Steam Wand. So follow these instructions now to keep yours in top condition.

Related Articles:

Leave a Comment

Your email address will not be published. Required fields are marked *