Is Breville Steamer Not Working? Here’s How to Fix It

Steaming is a healthy and convenient way of cooking, and Breville steamers are a popular choice for many households. 

However, like any appliance, steaming devices can develop problems over time. 

If your Breville steamer has stopped working, don’t despair, this blog post will guide you through some troubleshooting steps to identify and fix the issue.

Is Breville Steamer Not Working? Here’s How to Fix It?

Breville Steamer Not Working

Step 1: Check the Power Supply

It may seem obvious, but sometimes the simplest solutions are the most effective. The first thing to check is whether the steamer is receiving power. 

Make sure it is plugged into a working power outlet and the cord is not damaged. Suppose, the cord is damaged; it needs to be replaced. If you’re using a power strip, make sure it is turned on. 

If there is a power surge or outage, it is also possible that the circuit breaker tripped. Check the circuit breaker and reset it if necessary.

Step 2: Check the Water Tank

If the power supply is fine, check the water tank. If your Breville steamer is not working, it might be because the water tank is empty or the water level is too low. 

Check the water level and refill if necessary. The water level should be above the minimum line but below the maximum line. Too much water could cause the steamer to overflow.

Step 3: Check the Heating Element

If the power supply and water tank are fine, the issue could be with the heating element. The heating element is the part of the steamer that heats the water to produce steam. 

Over time, the heating element may become clogged with mineral deposits, reducing its efficiency. 

To clean the heating element, mix one part white vinegar with two parts water, and run the steamer for about 20 minutes. This should dissolve any mineral buildup. If the heating element is damaged, it needs to be replaced.

Step 4: Check the Fuse

If the heating element is not the problem, the issue could be with the fuse. The fuse is a safety feature that prevents the steamer from overheating. 

If the steamer gets too hot, the fuse will shut off the power to the heating element. If the fuse is blown, the steamer will not work. The fuse is typically located near the power supply and can be easily replaced.

Step 5: Contact Customer Support

If you’ve tried all the above steps and your Breville steamer is still not working, it might be time to contact customer support. 

Breville offers excellent customer support, and its representatives should be able to assist you in identifying and resolving the issue.

Breville Steamer Not Working – Reasons and Troubleshooting Tips

Many people encounter problems with their steamer, and we’re here to help. Now I’ll cover some common reasons why your Breville steamer might not be working and provide troubleshooting tips to help you get it back up and running.

Reason #1: Faulty Power Source

The first thing you should check if your Breville steamer is not working is the power source. Make sure that the steamer is plugged into an electrical outlet that is functioning correctly. 

If the outlet is working, then check the cord and ensure that there are no breaks or frays which could cause the steamer to malfunction. If the cord is damaged, you may need to have it replaced.

Reason #2: Mineral Build Up

Another common reason why a Breville steamer might not be working is a buildup of mineral deposits. 

If the water in your area is hard, then minerals can accumulate on the heating element or other components of the steamer. This can cause the steamer to malfunction or stop working altogether. 

To fix this issue, you can try descaling the steamer by following the manufacturer’s instructions.

Reason #3: Faulty Heating Element

If your Breville steamer is not heating up, then the heating element might be faulty. This can be caused by a number of things, including a buildup of minerals, a loose connection, or an electrical issue. 

One way to test the heating element is to unplug the steamer, wait for it to cool down, and then check for any signs of damage or wear. If you see any signs of damage, then the heating element may need to be replaced.

Reason #4: Malfunctioning Thermostat

The thermostat is responsible for regulating the temperature of the steam in the Breville steamer. 

If the thermostat is faulty, then the steamer may not reach the desired temperature or may overheat. 

You can test the thermostat by using a multimeter to check the resistance. If the resistance is outside the manufacturer’s specified range, then the thermostat may need to be replaced.

Reason #5: Clogged Steam Nozzle

A clogged steam nozzle can cause your Breville steamer to malfunction or stop working altogether. This can be caused by a buildup of mineral deposits, dirt, or other debris. 

To fix this issue, you can try cleaning the steam nozzle with a toothbrush or other small brush. If the nozzle is still clogged, then you may need to disassemble the steamer and clean the nozzle more thoroughly.

Preventing Breville Steamer Issues

Breville steamers are popular kitchen appliances that make steaming food a breeze. However, like any appliance, they can experience issues that affect their performance. 

To prevent common Breville steamer problems and ensure optimal functioning, follow these simple tips:

  1. Clean Regularly: Regular cleaning is crucial to maintaining your steamer’s efficiency. Remove any food debris from the steamer trays and base after each use. Also, clean the water reservoir with a soft cloth and mild detergent to prevent mineral buildup.
  2. Use Distilled Water: Using distilled or filtered water instead of tap water can help minimize mineral buildup in your steamer. This will prevent clogs in the steaming mechanism and extend the life of your appliance.
  3. Inspect Seals and Gaskets: Check the seals and gaskets on your Breville steamer for wear and tear regularly. Replace them if necessary to ensure proper sealing and prevent steam leakage.
  4. Avoid Overfilling: Overfilling the water reservoir can cause water to spill into the steamer’s internal components, leading to potential damage. Always follow the manufacturer’s guidelines for filling the reservoir.
  5. Store Properly: When not in use, store your Breville steamer in a cool, dry place to avoid moisture buildup and prolong its lifespan.
  6. Follow Manufacturer’s Instructions: Always consult the user manual for proper usage and maintenance guidelines. Adhering to these instructions will help prevent issues and ensure your steamer functions optimally.

By taking these preventive measures, you can keep your Breville steamer running smoothly and enjoy perfectly steamed dishes every time. Regular maintenance and proper usage are key to preventing common steamer issues and extending the life of your appliance.


A Breville steamer is a great appliance for healthy cooking but can develop issues over time. If your Breville steamer is not working, perform the above steps to troubleshoot and identify the issue. 

A little investigation and maintenance will go a long way toward extending the life and efficiency of your steamer. 

If all else fails, don’t hesitate to contact Breville customer support for assistance. With their help, you’ll have your steamer up and running in no time!

Related Articles: 

Leave a Comment

Your email address will not be published. Required fields are marked *