[Fixed] Keurig K Supreme Plus Descale Light Won’t Turn Off

If you’re a Keurig K Supreme Plus owner, you might be wondering what to do when the descaling light doesn’t turn off even after completing the descaling process. 

This can be quite frustrating, especially if you’ve followed all the instructions in the manual. 

However, there are various reasons why your Keurig K Supreme Plus descaling light won’t turn off, and in this article, I’ll explore some of these common issues and how to resolve them.

Keurig K Supreme Plus Descaling Light Won’t Turn Off | Reasons and Fixes

keurig k supreme plus descale light won't turn off

1. Incorrect Procedure:

When descaling your Keurig K Supreme Plus, you must follow the manufacturer’s instructions. 

If you missed a step, such as not filling the water reservoir with a descaling solution or not pressing the proper buttons, the descaling light won’t turn off. To resolve this issue, repeat the descaling process, following every step accurately.

2. Unclean Water Reservoir:

Sometimes, the descaling light won’t turn off because of the presence of debris, leftover descaling solution, or mineral buildup in the water reservoir. 

To solve this, remove the water reservoir from the machine, clean it with warm water and mild detergent, and dry it thoroughly before reinserting it into the machine.

3. Blocked Water Line:

If the descaling light won’t turn off, a blocked water line may be the cause. This blockage may be due to the buildup of debris or mineral in the machine’s internal waterline, making it difficult for water to pass through. 

To get rid of the obstruction, use a paperclip or needle to unclog the water line. You can also use a mixture of water and vinegar to help dissolve mineral buildup in the lines.

4. Faulty Sensor:

Sometimes, the cause of a descaling light not turning off could be a faulty sensor in your Keurig K Supreme Plus. This issue can be resolved by resetting your machine

To reset your machine, unplug it for about five minutes and plug it back in. Once it’s plugged back in, turn the power button on and try the descaling process again.

5. Defective Control Board:

If none of the above methods work, there may be a deeper issue with your Keurig K Supreme Plus that’s causing the descaling light not to turn off. A defective control board may be the culprit. 

You can contact the manufacturer’s customer service center to book a repair service or replace your machine if it’s still under warranty.

Keurig K Supreme Plus Descaling Light Won’t Turn Off – 3 Best Fixes

1. Perform a Hard Reset: 

A quick and easy solution to this issue is to perform a hard reset. Resetting your Keurig K Supreme Plus is simple. 

Start by unplugging your coffee machine and leaving it unplugged for about 20 minutes. After that, plug your coffee maker back in, and the descaling light should turn off. 

This fix works because it clears out any glitches or minor issues that aren’t visible in the system.

2. Check the Water Filter: 

Another reason why your Keurig K Supreme Plus’s descaling light won’t turn off may be due to the water filter. Check if the filter is installed correctly and in good condition. 

A dirty or clogged filter may cause a disturbance in the descaling process, therefore leaving the light on. Remove the filter, clean it, and reinstall it to see if the issue disappears.

3. Run the Descaling Process Again: 

If none of the above mentioned methods have worked, running the descaling process again might help. 

Begin by removing the water reservoir, discarding any water remaining in it. Then, fill the reservoir with a mixture of water and Keurig descaling solution. Restart the descaling process as per the instructions given in your Keurig K Supreme Plus manual. 

Once the descaling process is finished, run a few brewing cycles with plain water to make sure there’s no descaling solution left in the machine.

Why is my descale light still on after descaling my Keurig K Supreme Plus?

There are a few common reasons why the descale light on your Keurig K Supreme Plus may stay on after you have already descaled the machine. 

First, make sure that you have properly descaled the machine according to the manufacturer’s instructions. 

If you have followed the instructions and the light is still on, the issue may be due to mineral deposits or scaling in the machine’s internal components. 

To fix the issue, try flushing the machine with vinegar or descaling the solution again. 

If the problem persists, you may need to contact Keurig customer service or bring the machine to an authorized service center.

Is it safe to use the Keurig K Supreme Plus even if the descale light is still on?

Generally, it is safe to continue using your Keurig K Supreme Plus even if the descale light is still on. 

However, it is recommended that you descale the machine as soon as possible to prevent any damage to the internal components of the machine. 

Additionally, if you have already descaled the machine and the light is still on, it may indicate that there is a problem with the machine’s internal components that could worsen over time if left unattended.

Can I turn off the descale light on my Keurig K Supreme Plus manually?

No, the descale light on the Keurig K Supreme Plus cannot be turned off manually. The light is designed to turn on automatically after a certain period of time to prompt the user to descale the machine. 

Once the machine has been descaled properly, the light will turn off on its own. If the light stays on after descaling, refer to Q1 above for troubleshooting tips.

Conclusion

Descale light not turning off on your Keurig K Supreme Plus is a common issue, but you can resolve it by following the methods outlined above. 

Before you rush to contact the manufacturer’s customer service center, it’s essential to check if you’ve missed any steps during the descaling process. 

If you’ve done everything right, you can be confident that there’s a solution to your problem, perhaps just requiring a reset or proper maintenance. 

As always, it’s good to take care of your Keurig machine by performing regular maintenance and cleaning to avoid future issues.

Related Articles:

Leave a Comment

Your email address will not be published. Required fields are marked *